Jaw Crusher 600×900mm

Jaw crusher is powered by electric motor, driving the eccentric shaft through the belt drive, so that the moving jaw makes reciprocating movement according to the predetermined track, so as to break the material into the crushing cavity composed of fixed jaw plate, movable jaw plate and side guard plate, and unload the finished material through the lower discharge port. This series of jaw crusher crushing mode of the curved extrusion type, the motor drive belt and pulley, through the eccentric shaft, when the jaw rising angle between the jaw and the jaw and the jaw to close, and then when the jaw down, the elbow and the jaw of the jaw under the action of the jaw, the spring, the broken material from the broken cavity mouth discharge, with the motor continuous rolling broken motor jaw for periodic crushing and discharging, to achieve mass production.

1.The crusher is used for breaking all kind of ore or rock with material anti-pressure strength less than 500MPa, and grain size no more than 250mm.

2.Inlet opening size (Width X Length)：600*900（mm）

3.Adjusting range of outlet opening：65～160（mm）

4.Maximum inlet size：500（mm）

5.Capacity：25～63（m³/h）

6.Power：75KW

7.Overall size (LXWXH):1700×1732×1653mm

8.Equipment wt.: excluding motor:14210Kg