Slag Discharge Pulley
Slag Discharge Pulley is especially suitable for the turning point roller of steel raw material plant, wharf stacking yard, power yard and coal yard. When there are more materials on the return belt, the material can be discharged from the return belt.
1. Long service life. Avoid overload operation and extend the service life of the drum.
2. check up. Periodic check whether the welding of drum cover and end cover is reliable, good lubrication and reduce wear loss.
3. put in order. Clean up the dust and other foreign bodies stuck on the drum regularly
The slag discharge drum is used in the belt conveyor. The principle of the slag discharge drum has a long hole parallel to the axial direction. When the return belt has the material, the material can enter the long hole and enter the drum. On the inside of the drum is a double cone with two points thick middle, with holes at both ends of the drum. After the axial long hole on the surface of the drum and is discharged into the yard through the cone and the end hole. It avoids the shelf pressure and wear of the belt at the changing roller, and improves the service life of the belt.
Related News
Submitted successfully
We will contact you as soon as possible
