Ring Hammer Crusher
The ring hammer crusher can be divided into PCH type and PHZ type according to different crushing materials.
The PCH type ring hammer coal crusher is most suitable for crushing various brittle materials, such as coal, coal gangue, coke, slag, red sandstone, shale, loose limestone,etc. The compressive strength of the material does not exceed 40MPa, and the surface moisture should not exceed 8 to 11%. For non-adhesive materials, the surface moisture can be controlled within 15%.
PHZ type ring hammer crusher is suitable for crushing various ores, such as pyrite,phosphate ore, limonite, magnetite, limestone and cobblestone. Its compressive strength does not exceed 60MPa and the surface moisture does not exceed 15%. When the crushed particle size of pyrite ore and phosphate ore is less than 6mm, the surface moisture of the materials is less than 15%.
The structural characteristics of the ring hammer crusher can adjust the output particle size. The product has particle size requirements after the material is crushed. The ring hammer crusher should be preferred if the oversize particle is not allowed.
Model | feed fineness （mm） | Material granularity（mm） | Efficiency （t/h） | Size (Length*width *height) （mm） | weight （T） | |
PCH0402 | 200 | 30 | 8～12 | 810×890×560 | 800 | |
PCH0404 | 200 | 30 | 16～25 | 980×890×570 | 1050 | |
PCH0604 | 200 | 30 | 22～33 | 1050×1270×800 | 1430 | |
PCH0606 | 200 | 30 | 30～60 | 1350×1270×820 | 1770 | |
PCH0808 | 200 | 30 | 75～105 | 2850×1650×1200 | 3600 | |
PCH0808A | 200 | 10 | 20 | 40～150 | 2850×1650×1200 | 4100 |
30 | 40 | |||||
PCH1010 | 300 | 30 | 130～200 | 3550×2000×1500 | 6100 | |
10 | 65～100 | |||||
PCH1016 | 300 | 30 | 90～350 | 5036×2000×2160 | 8560 | |
PCH1216 | 400 | 30 | 600 | 5750×2500×2200 | 15000 | |
PHZ1212 | 400 | 30 | 400 | 4995×2550×1950 | 13250 | |
PHZ1216 | 400 | 30 | 600 | 5750×2500×2200 | 15000 | |
PHZ1221 | 400 | 30 | 800 | 6000×2500×2210 | 24000 | |
Related News
Submitted successfully
We will contact you as soon as possible
