Head Drive Pulley, Return Pulley,Bend Pulley, Snub Pulley,Tensioning Pulley, Take up Pulley can be provided.We are designing and manufacturing pulleys, using materials of the highest quality in a production process employing advanced technology.
Contact Now
Polyurethane pulleys are a type of pulley made using polyurethane material and are widely used in various industrial equipment.
Contact Now
Cold sticky pulley is a new type of pulley bonding method compared with the traditional pulley hot vulcanization casting method.Pulley cold bonding has been widely used in rubber surface coating of conveyor pulley in mining, port, power plant, metallurgy, cement, coal mine and other industries.
Contact Now
Drive/Head Pulley - A conveyor pulley used for the purpose of driving a conveyor belt. Typically mounted in external bearings and driven by an external drive source.Drive Drum is the main component of power transmission. The drum can be divided into single drum (the angle of the belt to the drum is 210°~ 230°)，Double Drum (the angle of the belt to the drum is up to 350°) and multi-drum (used for high power)
Contact Now
Bend Pulley - A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system.The bend pulley is used for changing the direction of the belt. The bend pulley is usually installed at the tail part or the vertical take-up equipment part when the belt direction need to 180°bending.
Contact Now
A conveyor will always consist of at least two pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required. Different kinds of conveyor pulleys ShanDongShanKkuang ® sells conveyor pulleys in all the following sub-categories:Head pulleysThe head pulley is located at the discharge point of the conveyor.
Contact Now
The slag discharge drum is used in the belt conveyor. The principle of the slag discharge drum has a long hole parallel to the axial direction. When the return belt has the material, the material can enter the long hole and enter the drum. On the inside of the drum is a double cone with two points thick middle, with holes at both ends of the drum. After the axial long hole on the surface of the drum and is discharged into the yard through the cone and the end hole. It avoids the shelf pressure and wear of the belt at the changing roller, and improves the service life of the belt.
Contact Now
The MQS series wet lattice ball mill is a device to grind ores and other materials of various hardness, which can be widely used as the main equipment for grinding operations in metal beneficiation, building materials, and chemical industry. It is called a lattice ball mill because the ore discharge grid is installed at the end of the ore discharge. Lattice ball mill consists of transmission part, rotary part, main bearing, feeding and discharging device, lubrication part and electric control part.
Contact Now
The MLTB series edge drive wet desulfurization ball mill is a special ball mill with limestone and gypsum wet flue gas desulfurization system developed by the company that absorbs the world's advanced technology. It is used for the preparation of limestone slurry, and its performance reaches the international advanced level. Compared with other types of ball mills, it has features of environmental protection, energy saving, simple maintenance, reliable operation, and high degree of automation.
Contact Now
MQY series overflow ball mill is used to grind ores and other materials of various kinds of hardness. It can be widely used as the main equipment for grinding operations in industries such as metal beneficiation, building materials and chemical industry. It is called an overflow ball mill because the end of the ore discharge is based on the ore slurry level.
Contact Now
Product description:MLT series compact center drive wet desulfurization ball mill is a special ball mill for limestone and gypsum wet flue gas desulfurization system developed by the company by introducing the world's advanced technology. It is used for the preparation of limestone slurry, and its performance reaches the international advanced level. Compared with other types of ball mills, it has features of environmental protection, energy saving, compact structure, light weight, easy installation and maintenance, reliable operation, and high degree of automation.
Contact Now
Spiral roller is an important part of belt conveyor. Its product structure design and function characteristics make it perform well in the environment of conveying sticky wet materials, with the characteristics of non-stick roller, strong self-cleaning force and non-stick belt. The spiral roller is easy to install, can provide smooth transmission, and has the advantages of low noise, low energy consumption and prolong the service life of the tape.
Contact Now
MB series rod mills are widely used in the primary grinding of artificial stone sand, metallurgical steel slag processing, mineral processing plants, power departments and chemical plants. The grinding body contained in the barrel of the rod mill is a steel rod, generally using a wet overflow type. The mill has the characteristics of uniform product size, less over-crushing phenomenon, higher grinding efficiency, and easy replacement of worn parts.
Contact Now
PCFK1413 reversible impact crusher is widely used in highways, coal, railroads, airports and other fields that require high shape of stone materials. The equipment has the following features and performance:1. Large crushing ratio and high crushing efficiency: through high-speed impact and repeated crushing, PCK1413 Reversible Impact Crusher is able to quickly crush large materials to the required size, and is suitable for all kinds of materials with compressive strength not exceeding 360 MPa.2.
Contact Now
The main shaft of reversible counterattack hammer crusher is made of high quality alloy forged steel, and the material and heat treatment technology have been very mature in the application of large surface shaft parts for decades. The hammer heads are combined, thus saving a lot of wear-resistant alloy materials and reducing production costs.
Contact Now
Hammer Crusher is Single rotor, irreversible hammer crusher, the impact of the hammer to crush brittle materials or medium hardness minerals (such as coal, salt, limestone, gypsum, etc.), but can not be used with toughness, fibrous and humidity compared with the hammer crusher characteristics: crushing ratio is large, so it is suitable for use under the requirement of small size.NameParameterRotor length X length（mm） Φ800×600Max.
Contact Now
Main application of hammer crusher:Hammer crusher is used to crush all kinds of medium hard and weak abrasive materials. The compressive strength of the material is not more than 100MPa，and the moisture content is less than 15%. The crushed materials are coal, salt, chalk, gypsum, brick, limestone, etc.It can also be used to crush wood, paper or waste of asbestos cement with fiber structure, strong elasticity and toughness to recover asbestos fiber, etc. In addition, hammer crusher can not only be used in crushing production
Contact Now
1.Model：PF-13152.Rotor length X length：ф1300×1500（mm）3.Max. feeding size：150~350（mm）4.Capacity：100~250（t/h）5.Power：180~315KW6.Overall size (LXWXH):2230×3515×1515mm7.Equipment wt.: excluding motor:23000KgNotes: The capacity listed in the table is obtained under following condition:1. Material to be crushed is ore.2.The anti-pressure strength of material of ore within 200MPa.3.Surface water content within 2%.4.Bulk density is 1.6t/m3.5.Feed material along full length of rotor evenly and continuously.An impact crusher is a crushing machine that uses impact energy to crush materials.
Contact Now
Product detailThe PCFK reversible impact hammer crusher uses a high-speed rotating hammer head to crush the coal that enters the crusher and rushes towards the impact plate,which can achieve crush in the process of repeated collisions.The impact plate adopts a two-arc suspension body, and the material is discharged from the middle of the end of the two impact plate bodies after crushed.
Contact Now
The advantages of PF1210 impact crusher are high crushing efficiency, low power consumption, uniform product size, can reduce the number of crushing stages, simple structure, large production capacity, impact crusher plate hammer and liner plate, etc. using high wear-resistant materials, simplify the production process, suitable for large and medium scale crushing production. It is applied to the crushing of large materials in metallurgy, building materials, mining, highway, mineral processing and other industries.NameParameterRotor length X length（mm）Φ1250×1000Max.
Contact Now
Reversible impact hammer crusher is a new type of crushing equipment, its crushing rotor can be forward or reversed. This kind of crusher is mainly by impact to crush materials, belongs to a new type of crusher equipment.1.Model：PCFK-20252.Rotor length X length：ф2000×2500（mm）3.Max. feeding size：80（mm）4.Finishing particle size：≤3（mm）4.Capacity：500（t/h）5.Power：1250KW6.Overall size (LXWXH):7874×4390×4530mm7.Equipment wt.: excluding motor:62000KgNotes: The capacity listed in the table is obtained under following condition:1.
Contact Now
We hope--we pursue the zenith of technology and quality--as our management concept all the time.
Contact Now
Reversible impact hammer crusher is one of the main equipment of fine limestone, coal or other brittle materials below medium hardness in metallurgy, building materials, chemical and hydropower industries.
Contact Now
The reversible impact hammer crusher is mainly composed of the crusher host, electric motor, hydraulic coupling, hydraulic station, shock absorption system, etc.
Contact Now
