Main application of hammer crusher:Hammer crusher is used to crush all kinds of medium hard and weak abrasive materials. The compressive strength of the material is not more than 100MPa，and the moisture content is less than 15%. The crushed materials are coal, salt, chalk, gypsum, brick, limestone, etc.It can also be used to crush wood, paper or waste of asbestos cement with fiber structure, strong elasticity and toughness to recover asbestos fiber, etc. In addition, hammer crusher can not only be used in crushing production
Contact Now
Hammer Crusher is Single rotor, irreversible hammer crusher, the impact of the hammer to crush brittle materials or medium hardness minerals (such as coal, salt, limestone, gypsum, etc.), but can not be used with toughness, fibrous and humidity compared with the hammer crusher characteristics: crushing ratio is large, so it is suitable for use under the requirement of small size.NameParameterRotor length X length（mm） Φ800×600Max.
Contact Now
Ring hammer crusher is mainly composed of frame, transmission shaft, rotor, counterattack cavity and other parts. The shell of heavy hammer crusher is welded with steel plate, which is divided into upper and lower parts, which is connected by bolts. In order to avoid wear and deformation of the inner wall of the box under the impact of the material, the shell is inlaid with protective lining plate. The rotor is composed of the rotor shaft, disk, hammer shaft, ring hammer, board hammer and other parts.
Contact Now
The main shaft of reversible counterattack hammer crusher is made of high quality alloy forged steel, and the material and heat treatment technology have been very mature in the application of large surface shaft parts for decades. The hammer heads are combined, thus saving a lot of wear-resistant alloy materials and reducing production costs.
Contact Now
PHZ type ring hammer crusher is suitable for crushing various ores, such as pyrite,phosphate ore, limonite, magnetite, limestone and cobblestone. Its compressive strength does not exceed 60MPa and the surface moisture does not exceed 15%. When the crushed particle size of pyrite ore and phosphate ore is less than 6mm, the surface moisture of the materials is less than 15%.The structural characteristics of the ring hammer crusher can adjust the output particle size. The product has particle size requirements after the material is crushed.
Contact Now
Product description：The hammer crusher is suitable for various materials such as crushing brittle, medium hard, surface moisture not exceeding 2% and compressive strength not exceeding 150MPa. It is used for crushing or fine crushing coal, coal gangue, limestone, shale, feldspar, gypsum, coke, brick and tile, limonite, crushed stone, salt and sulfur, and phosphate ore in many industries such as coal, metallurgy, building materials, chemical industry, power and other departments.
Contact Now
Heavy ring hammer crusher is an efficient crushing equipment, especially suitable for crushing a variety of medium hardness and brittle materials, such as limestone, coal, etc.
Contact Now
Ring hammer crusher is suitable for crushing all kinds of brittle materials, such as coal, coal rock, coke carbon, slag, shale, loose limestone, etc. The compressive strength of the material shall not exceed 10MPa, and the surface moisture shall not be greater than 8%.NameParameterRotor length X length（mm） Φ600×400Max. feeding size（mm）200Final grain size（mm）30Capacity（m³/h） 22-33MotorType Y180L—8Power（KW）18.5revolution（r/min）970Dimension (L*W*H)（mm）1050×1270×800Machine weight（Kg）1430
Contact Now
Heavy ring hammer crusher is suitable for coal crushing in the power plant, with large output, uniform discharge particle size, hydraulic shell opening, and convenient maintenance.
Contact Now
The coal block is crushed initially after entering the crusher under the impact of the high-speed rotating ring hammer, and then crushed again when rushed to the crushing plate and sieve plate at high speed. Meanwhile, the coal blocks also collide with each other. The impacted coal is sheared and crushed between the ring hammer and the crushing plate and sieve plate, flowing from top to bottom, continuously crushed, and discharged from the sieve hole after reaching the required particle size.
Contact Now
Ring hammer crusher is one of crushing equipment, but also a kind of hammer crusher series technology advanced equipment, its role is to smash the stone into finished material. Heavy hammer crusher is an advanced high power, high crushing ratio, high productivity crusher, and broke through the previous crushing principle of crushing equipment, can be reasonably adjusted according to the nature of the material, in the output, power is better.NameParameterRotor length X length（mm）Φ800×800Max.
Contact Now
Product detailThe PCFK reversible impact hammer crusher uses a high-speed rotating hammer head to crush the coal that enters the crusher and rushes towards the impact plate,which can achieve crush in the process of repeated collisions.The impact plate adopts a two-arc suspension body, and the material is discharged from the middle of the end of the two impact plate bodies after crushed.
Contact Now
Hammer crusher is a kind of equipment: single rotor and double rotor. It is a crusher that directly breaks a material of 600-1800 mm to 25 or 25 mm or less. Hammer crusher is suitable for cement, chemical, electric power, metallurgy and other industrial sectors broken medium hardness materials, such as limestone, slag, coke, coal and other materials in the crushing and fine crushing operation.NameParameterRotor length X length（mm） Φ600×400Max.
Contact Now
Heavy-duty Ring Hammer Crusher is a new product developed, suitable for power plant crushing coal crushing, large output, up to 200-2000T / H.1.Rotor diameter：1200（mm）2.Rotor length ：4465（mm）3.Feed particle size：≤400（mm）4.Finishing particle size：≤25（mm）5.Capacity：1200（t/h）6.Power：630KW7.Overall size (LXWXH):7312×3460×1950mm8.Equipment wt.: excluding motor:42000Kg
Contact Now
Reversible impact hammer crusher is one of the main equipment of fine limestone, coal or other brittle materials below medium hardness in metallurgy, building materials, chemical and hydropower industries.
Contact Now
Jaw crusher can be divided into three types according to the inlet width: large, medium and small. The inlet width of large machines is more than 600mm, and the inlet width of medium machines is between 300-600mm, while the inlet width of small machines is less than 300mm. This classification enables the jaw crusher to adapt to application scenarios of different sizes and production requirements.NameParameterRotor length X length（mm） Φ500×750Max.
Contact Now
The reversible impact hammer crusher is mainly composed of the crusher host, electric motor, hydraulic coupling, hydraulic station, shock absorption system, etc.
Contact Now
The reversible impact hammer crusher is a mechanical equipment specially designed for crushing medium-hardness brittle materials. This type of crusher is particularly suitable for processing materials such as raw coal and various other brittle materials.
Contact Now
Reversible impact hammer crusher is a new type of crushing equipment, its crushing rotor can be forward or reversed. This kind of crusher is mainly by impact to crush materials, belongs to a new type of crusher equipment.1.Model：PCFK-20252.Rotor length X length：ф2000×2500（mm）3.Max. feeding size：80（mm）4.Finishing particle size：≤3（mm）4.Capacity：500（t/h）5.Power：1250KW6.Overall size (LXWXH):7874×4390×4530mm7.Equipment wt.: excluding motor:62000KgNotes: The capacity listed in the table is obtained under following condition:1.
Contact Now
Hydraulic jaw crusher is widely used in metallurgy, mining, building materials, chemical industry, coal and other industries, mainly used in primary crushing products. Through its own constant vibration, it can clip large stones into small pieces, which is suitable for crushing the rock after blasting to facilitate transportation and use. In addition, the hydraulic jaw crusher also has the function of overload protection.
Contact Now
The performance advantages of the double-tooth roller crusher include the use of long teeth, small roller diameter, spiral cloth teeth, multi-disc four-tooth structure, which can handle powder and granular materials, and has low water content requirements. The design is usually driven by two motors, and the kinetic energy is more powerful, saving 45% of the same capacity.
Contact Now
YA series vibrating screen, with circular movement, is mainly applied to metallurgical, mining, power plant, water conservancy project, building material, light industry and chemical industry, which is a high-effective sieving machine for sizing bulk material such as coal, ore and coke. This series of vibrating screen has 40 kinds of specifications, including heavy-duty screen for sizing large grain and light-duty for medium or small grain. The screen can be divided into single or double screen according to screening method.
Contact Now
Double Tooth Roll Crusher has the advantages of small size, large crushing ratio, low noise, simple structure, convenient maintenance, high productivity, uniform particle size of broken materials, low crushing rate, convenient maintenance, sensitive overload protection, safe and reliable characteristics. This machine mainly uses special abrresistant roller to split the material to form the mechanism of high productivity. The double-tooth roller is driven by the universal coupling, and the roller gap can be adjusted by the gaskets.
Contact Now
