Slag Discharge Pulley-manufacture,factory,supplier from China

The slag discharge drum is used in the belt conveyor. The principle of the slag discharge drum has a long hole parallel to the axial direction. When the return belt has the material, the material can enter the long hole and enter the drum. On the inside of the drum is a double cone with two points thick middle, with holes at both ends of the drum. After the axial long hole on the surface of the drum and is discharged into the yard through the cone and the end hole. It avoids the shelf pressure and wear of the belt at the changing roller, and improves the service life of the belt.

Polyurethane pulleys are a type of pulley made using polyurethane material and are widely used in various industrial equipment.

Cold sticky pulley is a new type of pulley bonding method compared with the traditional pulley hot vulcanization casting method.Pulley cold bonding has been widely used in rubber surface coating of conveyor pulley in mining, port, power plant, metallurgy, cement, coal mine and other industries.

Head Drive Pulley, Return Pulley,Bend Pulley, Snub Pulley,Tensioning Pulley, Take up Pulley can be provided.We are designing and manufacturing pulleys, using materials of the highest quality in a production process employing advanced technology.

A conveyor will always consist of at least two pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required. Different kinds of conveyor pulleys ShanDongShanKkuang ® sells conveyor pulleys in all the following sub-categories:Head pulleysThe head pulley is located at the discharge point of the conveyor.

Drive/Head Pulley - A conveyor pulley used for the purpose of driving a conveyor belt. Typically mounted in external bearings and driven by an external drive source.Drive Drum is the main component of power transmission. The drum can be divided into single drum (the angle of the belt to the drum is 210°~ 230°)，Double Drum (the angle of the belt to the drum is up to 350°) and multi-drum (used for high power)

Bend Pulley - A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system.The bend pulley is used for changing the direction of the belt. The bend pulley is usually installed at the tail part or the vertical take-up equipment part when the belt direction need to 180°bending.

The MQS series wet lattice ball mill is a device to grind ores and other materials of various hardness, which can be widely used as the main equipment for grinding operations in metal beneficiation, building materials, and chemical industry. It is called a lattice ball mill because the ore discharge grid is installed at the end of the ore discharge. Lattice ball mill consists of transmission part, rotary part, main bearing, feeding and discharging device, lubrication part and electric control part.

MQY series overflow ball mill is used to grind ores and other materials of various kinds of hardness. It can be widely used as the main equipment for grinding operations in industries such as metal beneficiation, building materials and chemical industry. It is called an overflow ball mill because the end of the ore discharge is based on the ore slurry level.

Heavy ring hammer crusher is suitable for coal crushing in the power plant, with large output, uniform discharge particle size, hydraulic shell opening, and convenient maintenance.

MB series rod mills are widely used in the primary grinding of artificial stone sand, metallurgical steel slag processing, mineral processing plants, power departments and chemical plants. The grinding body contained in the barrel of the rod mill is a steel rod, generally using a wet overflow type. The mill has the characteristics of uniform product size, less over-crushing phenomenon, higher grinding efficiency, and easy replacement of worn parts.

Jaw crusher is powered by electric motor, driving the eccentric shaft through the belt drive, so that the moving jaw makes reciprocating movement according to the predetermined track, so as to break the material into the crushing cavity composed of fixed jaw plate, movable jaw plate and side guard plate, and unload the finished material through the lower discharge port.

The roller crusher is suitable for medium and fine crushing of materials with compressive strength less than 250 Mp, such as crushed pebble, limestone, iron ore, quartz, potassium feldspar, silicon metal, barite, basalt, granite, steel slag, cement clinker, etc. It has the characteristics of low maintenance cost, low water requirements, reliable performance, less power consumption, less dust and low noise.MAIN TECHNICAL PARAMETERItemsParameterRoller Diameter（mm）Φ410Max.

Ring hammer crusher is suitable for crushing all kinds of brittle materials, such as coal, coal rock, coke carbon, slag, shale, loose limestone, etc. The compressive strength of the material shall not exceed 10MPa, and the surface moisture shall not be greater than 8%.NameParameterRotor length X length（mm）   Φ600×400Max. feeding size（mm）200Final grain size（mm）30Capacity（m³/h）                  22-33MotorType   Y180L—8Power（KW）18.5revolution（r/min）970Dimension (L*W*H)（mm）1050×1270×800Machine weight（Kg）1430

Hydraulic jaw crusher is suited for breaking coarse and middle sized material blended with extra hard foreign matters, especially suitable for steel slag breaking. This kind of crusher use hydraulic supporting device, have the overload protection function.

Fine crushing jaw crusher is a kind of efficient equipment used for crushing hard materials, especially suitable for the crushing of ore and rock, widely used in mining, metallurgy, construction, chemical industry and other fields. It can deal with all kinds of hardness and medium hardness materials, including but not limited to limestone, iron ore, steel slag, phosphate ore, copper ore, silicon ore, quartz stone, etc., and is suitable for secondary medium crushing operations.NameParameterRotor length X length（mm） Φ250×1500Max.

Impact Crusher have the advantages of simple structure,high brcaking ratio,low energy consumption、the discharged granules are of high even degree and seldom over smash phenomenon,maintain convenient、granule degree be of large adjustment scope and can be broken selected.They are used in cement,fireproof materials in transportation(railway,highway and bridges)、coal、metallurgy and power construction ctc.industries for breaking medium and fine materials,such as rock、limestone、clinker、slag、coke,coal etc.Type PF-Ⅱ,PF-Ⅲ impact crushers have the following characteristics:breaking of hard rocks,wear-re

hydraulic jaw crusher is suitable for coarse and medium crushing operations under harsh conditions with extremely hard and strong foreign matter in the material, especially for the treatment of steel slag. It adopts hydraulic support device and has functions of overload protection. The feeding particle size is not more than 425 mm. the product has the advantages of simple structure, reliable performance, convenient operation, safe use and so on. Main models: PEY400X600，PEY400X750，PEY500X750, PEY 600X900 and other models.

Hammer crusher is a kind of equipment: single rotor and double rotor. It is a crusher that directly breaks a material of 600-1800 mm to 25 or 25 mm or less. Hammer crusher is suitable for cement, chemical, electric power, metallurgy and other industrial sectors broken medium hardness materials, such as limestone, slag, coke, coal and other materials in the crushing and fine crushing operation.NameParameterRotor length X length（mm） Φ600×400Max.

The crushing ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1210ii2.Rotor length X length：ф1250×1050（mm）3.Max.

We hope--we pursue the zenith of technology and quality--as our management concept all the time.

This Impact Crusher 1000×1000m is a new type of crusher designed by introducing and absorbing the latest technology at home and abroad.It is suitable for crushing materials with compressive strength ≤350 MPa and is widely used in highway, railroad, high strength dam and other projects.It is widely used in highway, railway, high-strength dams and other projects to crush rocks and construction waste (such as bricks, concrete blocks, etc.).NameParameterRotor length X length（mm）Φ1000×1000Max.

Jaw crusher, referred to as jaw breaker, consists of two jaw plates of dynamic Hubei and static jaw, which simulate the jaw movement of animals and complete the material crushing operation. It is widely used in mining, smelting, building materials, highway, railway, water conservancy and chemical industry, and the compressive strength of the crushed materials is 250 Mpa. Jaw crusher is mainly used as coarse and medium sher in mining, building materials, infrastructure and other departments.NameParameterRotor length X length（mm）Φ250×400Max.

Jaw crusher commonly known as jaw broken, also known as tiger mouth. A crusher that consists of two jaw plates, moving jaw and static jaw, which simulate the jaw movement of animals and complete the material crushing operation. Widely used in mine smelting, building materials, highway, railway, water conservancy and chemical industry in various ore and bulk material crushing.