Rubber Belting-manufacture,factory,supplier from China

Heavy Duty Conveyor Belting is a general series of products, is the cotton canvas, nylon, polyester canvas and steel rope core conveyor belt as traction components of continuous conveying equipment, can be widely used in coal, metallurgy, electric power, mining, port, chemical, light industry, petroleum and machinery and other industries, conveying a variety of bulk materials and components.

Linear Vibrating Screen, with linear movement, has 24 kinds of specifications, which can be used in coal preparation, mineral processing, power generation, sugar-making, salt-making and other industries for processing mid-granule material by dry or wet sizing, dewatering, medium-drainage and desliming. Such screen has good features of advanced structure, low vibrating noise, long life and easy maintenance. The screen deck has structure of slot deck and woven wire mesh. The company can design for special requirement of users if punched screen deck or rubber deck is selected.

Cold sticky pulley is a new type of pulley bonding method compared with the traditional pulley hot vulcanization casting method.Pulley cold bonding has been widely used in rubber surface coating of conveyor pulley in mining, port, power plant, metallurgy, cement, coal mine and other industries.

Characteristics of polyurethane scraper:1. Polyurethane scraper is made of polyurethane material, which has both the high strength of plastic and the high elasticity of rubber.2. Polyurethane scraper has ultra-high wear resistance, which is more than 5 times that of general rubber and plastic products.3. Polyurethane scraper hardness range is wide, 60A-95A hardness range. 4. Polyurethane scraper is resistant to oil and solvent, suitable for cleaning all kinds of materials. 5.

The comb roller has a hard rubber ring, which has a great effect to prevent the conveyor belt deviation and cleaning. It is specially used for the conveyor of sticky materials. Comcomb roll is applicable, including mining, wharf, coal, power plant, coking, export trade and other fields.

Impact Roller Idlers:Impact rollers are used as carrying rollers instead of normal steel rollers at a loading point. On steel roller there are rubber rings assembled, side by side, to absorb the weight and impact of material falling onto the belt. At the same time impact rollers reduce the shock and vibration through the steel structure.

Advantages of Electric Trolley Mining LocomotiveThe vector control transformer,AC frequency change electric motor and new locomotive cabinet designed and developed by yourself. The products has good sticking, good overload ability, good climbing, safety braking, big traction and easy to operate.Human oriented design, the operation table of driver cab has speed/odometer display and locomotive running signal lamp.Energy-saving, 25% energy saved compared to DC driving. The products can adapt mining working environment, accepted

Trolley Locomotive is a traction device for rail vehicle transportation, which use the traction motor as power to drive the wheels to rotate and with the help of friction between the wheels and the rail surface to enable the locomotive runs on the track. It is mainly used for underground transportation and long-distance transportation on the ground.

This kind of screen is mainly used in coal, metallurgy, mine, power plant, construction material industry, water conservancy project, light industry and chemical industry.

The double roll crusher is a common crushing equipment used to break raw materials to the desired particle size. It usually consists of two or more parallel rotating rollers, and the gap between the rollers can be adjusted to control the broken particle size.

It is a medium and fine crusher with a simple, compact and light construction. Such crusher has large adjustment range of grain size and cutting device for repairing wear roll, which can easily adapt to humid material and is good at discharging material smoothly.

Four-roll crusher is a kind of medium and fine crushing products supporting metallurgical mining equipment. It breaks the required granular material by adjusting the gap of the upper and lower rollers.

The slag discharge drum is used in the belt conveyor. The principle of the slag discharge drum has a long hole parallel to the axial direction. When the return belt has the material, the material can enter the long hole and enter the drum. On the inside of the drum is a double cone with two points thick middle, with holes at both ends of the drum. After the axial long hole on the surface of the drum and is discharged into the yard through the cone and the end hole. It avoids the shelf pressure and wear of the belt at the changing roller, and improves the service life of the belt.

Drive/Head Pulley - A conveyor pulley used for the purpose of driving a conveyor belt. Typically mounted in external bearings and driven by an external drive source.Drive Drum is the main component of power transmission. The drum can be divided into single drum (the angle of the belt to the drum is 210°~ 230°)，Double Drum (the angle of the belt to the drum is up to 350°) and multi-drum (used for high power)

MB series rod mills are widely used in the primary grinding of artificial stone sand, metallurgical steel slag processing, mineral processing plants, power departments and chemical plants. The grinding body contained in the barrel of the rod mill is a steel rod, generally using a wet overflow type. The mill has the characteristics of uniform product size, less over-crushing phenomenon, higher grinding efficiency, and easy replacement of worn parts.

The MQS series wet lattice ball mill is a device to grind ores and other materials of various hardness, which can be widely used as the main equipment for grinding operations in metal beneficiation, building materials, and chemical industry. It is called a lattice ball mill because the ore discharge grid is installed at the end of the ore discharge. Lattice ball mill consists of transmission part, rotary part, main bearing, feeding and discharging device, lubrication part and electric control part.

MQY series overflow ball mill is used to grind ores and other materials of various kinds of hardness. It can be widely used as the main equipment for grinding operations in industries such as metal beneficiation, building materials and chemical industry. It is called an overflow ball mill because the end of the ore discharge is based on the ore slurry level.

The MLTB series edge drive wet desulfurization ball mill is a special ball mill with limestone and gypsum wet flue gas desulfurization system developed by the company that absorbs the world's advanced technology. It is used for the preparation of limestone slurry, and its performance reaches the international advanced level. Compared with other types of ball mills, it has features of environmental protection, energy saving, simple maintenance, reliable operation, and high degree of automation.

Product description:MLT series compact center drive wet desulfurization ball mill is a special ball mill for limestone and gypsum wet flue gas desulfurization system developed by the company by introducing the world's advanced technology. It is used for the preparation of limestone slurry, and its performance reaches the international advanced level. Compared with other types of ball mills, it has features of environmental protection, energy saving, compact structure, light weight, easy installation and maintenance, reliable operation, and high degree of automation.

Strength Impact Crusher ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1007ii2.Rotor length X length：ф1000×700（mm）3.Max.

Impact Crusher have the advantages of simple structure,high brcaking ratio,low energy consumption、the discharged granules are of high even degree and seldom over smash phenomenon,maintain convenient、granule degree be of large adjustment scope and can be broken selected.They are used in cement,fireproof materials in transportation(railway,highway and bridges)、coal、metallurgy and power construction ctc.industries for breaking medium and fine materials,such as rock、limestone、clinker、slag、coke,coal etc.Type PF-Ⅱ,PF-Ⅲ impact crushers have the following characteristics:breaking of hard rocks,wear-re

Technical Specifications of PF 1210 lmpact CrusherThe rotor diameter is 1250mm, the rotor length is 1050 mm, the maximum feeding size is 350mm, the production capacity is 70-120t/h, the rotor speed is 508r / min, the motor power is 110KW, and the overall dimension (length x width x height) of PF 1210 impact crusher is 2945x3028x2809mm.An impact crusher is a crushing machine that uses impact energy to crush materials. The rotor rotates high speed when the machine is working, driven by the motor.

PCFK1413 reversible impact crusher is widely used in highways, coal, railroads, airports and other fields that require high shape of stone materials. The equipment has the following features and performance:1. Large crushing ratio and high crushing efficiency: through high-speed impact and repeated crushing, PCK1413 Reversible Impact Crusher is able to quickly crush large materials to the required size, and is suitable for all kinds of materials with compressive strength not exceeding 360 MPa.2.

The crushing ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1214ii2.Rotor length X length：ф1250×1400（mm）3.Max.