MB series rod mills are widely used in the primary grinding of artificial stone sand, metallurgical steel slag processing, mineral processing plants, power departments and chemical plants. The grinding body contained in the barrel of the rod mill is a steel rod, generally using a wet overflow type. The mill has the characteristics of uniform product size, less over-crushing phenomenon, higher grinding efficiency, and easy replacement of worn parts.
Contact Now
The MQS series wet lattice ball mill is a device to grind ores and other materials of various hardness, which can be widely used as the main equipment for grinding operations in metal beneficiation, building materials, and chemical industry. It is called a lattice ball mill because the ore discharge grid is installed at the end of the ore discharge. Lattice ball mill consists of transmission part, rotary part, main bearing, feeding and discharging device, lubrication part and electric control part.
Contact Now
MQY series overflow ball mill is used to grind ores and other materials of various kinds of hardness. It can be widely used as the main equipment for grinding operations in industries such as metal beneficiation, building materials and chemical industry. It is called an overflow ball mill because the end of the ore discharge is based on the ore slurry level.
Contact Now
The MLTB series edge drive wet desulfurization ball mill is a special ball mill with limestone and gypsum wet flue gas desulfurization system developed by the company that absorbs the world's advanced technology. It is used for the preparation of limestone slurry, and its performance reaches the international advanced level. Compared with other types of ball mills, it has features of environmental protection, energy saving, simple maintenance, reliable operation, and high degree of automation.
Contact Now
Product description:MLT series compact center drive wet desulfurization ball mill is a special ball mill for limestone and gypsum wet flue gas desulfurization system developed by the company by introducing the world's advanced technology. It is used for the preparation of limestone slurry, and its performance reaches the international advanced level. Compared with other types of ball mills, it has features of environmental protection, energy saving, compact structure, light weight, easy installation and maintenance, reliable operation, and high degree of automation.
Contact Now
The crushing ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1210ii2.Rotor length X length：ф1250×1050（mm）3.Max.
Contact Now
The crushing ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1214ii2.Rotor length X length：ф1250×1400（mm）3.Max.
Contact Now
Strength Impact Crusher ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1007ii2.Rotor length X length：ф1000×700（mm）3.Max.
Contact Now
Double tooth roller crusher, also known as 2 PGC of roller crusher, is mainly used in ore operations, by transmission device, frame part, crushing roller, mechanical spring device, linkage mechanism, etc., and the wear-resistant tooth roller high-speed rotation of material split, instant hard broken, not broken, formed the mechanism of high productivity, operation and maintenance is more convenient.
Contact Now
1、 Application The crusher is suitable for breaking loose and fragile material with tensile strength not less than 100 MPa such as cold coke and coal lump.2、 Main technical data2.1、roller diameter ￠700 mm2.2、Roller working length 1500 mm2.3、roller revolution 75 r/min2.4、Max.
Contact Now
Double-tooth roller crusher, roller surface shape can be divided into thick and thin tooth roller, can be adjusted according to the size of the material required for the production, suitable for brittle and soft materials. Double-tooth roller crusher is suitable for sinter, coal, cement, silicate, glass, ceramics and other industries, suitable for the crushing of brittle materials below medium hardness, mainly used for the fine crushing operation of ore.NameParameterRotor length X length（mm） Φ900×900Max.
Contact Now
1. Application scopeThe crusher is suitable for breaking loose and fragile material with tensile strength not less than 100MPa, such as cold coke and coal lump.2. Main technical parameter2.1、Roller diameter： ￠500 mm2.2、Roller working length： 1500 mm2.3、Roller revolution： 64/67.8 r/min2.4、Max. feed size： 300mm2.5、Max.
Contact Now
Double tooth roller crusher, belongs to the type of double roller machine, especially suitable for sinter, coal, cement, silicate, glass, ceramics and other industries, mainly used for the crushing of brittle materials below medium hardness, especially in the fine operation of ore. This crusher uses two rollers rotating opposite to each other to control the particle size of the material by adjusting the gap between the rollers, so as to realize the crushing of the material. The roller surface of the double-tooth roller crusher can be coarse or fine teeth.
Contact Now
The type includes 2PG series double roller crusher and 4PG series four roller crusher.2PG double roller crusherMain models: 2PG400x250, 2PG610 x 400, 2PG750 x 500, 2PG750 x 700, 2PG750 x 1000，2PG900x 900, 2PG1000x800, 2PG1200 x 1000 and so on.4PG series four roller crusherMain models:4G900 x700,4G1000x900, 4PG1200 x 1000, etc.
Contact Now
The working principle of the double-tooth roller crusher is based on the action of rolling force and grinding force. When the material enters the crushing cavity, it is forced between the two rollers by the rodent force of the rotating roller, and the squeezing and grinding of the roller, making the material break. The broken small particles are thrown along the tangent direction of the roller rotation and under the machine through the gap between the two roller axes, forming the finished product.
Contact Now
The conveyor transfer chutes is usually installed at the material collecting area of the belt conveyor, which plays the role of the material guiding centralizing to reduce the deviation of the belt and dust suppression and dust prevention. According to the different environment, it can be divided into a variety of structural types: general-purpose material conveyor transfer chutes, double-layer sealed material conveyor transfer chutes, fully enclosed material conveyor transfer chutes, non-powered dust-removing material conveyor transfer chutes, etc.
Contact Now
Mainly used for the sealing between the conveyor belt and the guide chute and the sealing between the buffer bed and guide chute.
Contact Now
A conveyor will always consist of at least two pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required. Different kinds of conveyor pulleys ShanDongShanKkuang ® sells conveyor pulleys in all the following sub-categories:Head pulleysThe head pulley is located at the discharge point of the conveyor.
Contact Now
Bend Pulley - A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system.The bend pulley is used for changing the direction of the belt. The bend pulley is usually installed at the tail part or the vertical take-up equipment part when the belt direction need to 180°bending.
Contact Now
Heavy Duty Conveyor Belting is a general series of products, is the cotton canvas, nylon, polyester canvas and steel rope core conveyor belt as traction components of continuous conveying equipment, can be widely used in coal, metallurgy, electric power, mining, port, chemical, light industry, petroleum and machinery and other industries, conveying a variety of bulk materials and components.
Contact Now
The friction roller is an important part of the belt conveyor, which is mainly divided into friction raising roller and lowering heart roller. The function of these rollers is to support the conveyor belt and material weight on the belt conveyor.
Contact Now
The roller is an important part of the belt conveyor, many kinds, large quantity, can support the conveyor belt and material weight. It accounts for 35% of the total cost of a belt conveyor, generating more than 70% of the resistance, so the quality of the roller is particularly important.
Contact Now
The slag discharge drum is used in the belt conveyor. The principle of the slag discharge drum has a long hole parallel to the axial direction. When the return belt has the material, the material can enter the long hole and enter the drum. On the inside of the drum is a double cone with two points thick middle, with holes at both ends of the drum. After the axial long hole on the surface of the drum and is discharged into the yard through the cone and the end hole. It avoids the shelf pressure and wear of the belt at the changing roller, and improves the service life of the belt.
Contact Now
