Impact Roller Conveyor-manufacture,factory,supplier from China

Impact Roller Idlers:Impact rollers are used as carrying rollers instead of normal steel rollers at a loading point. On steel roller there are rubber rings assembled, side by side, to absorb the weight and impact of material falling onto the belt. At the same time impact rollers reduce the shock and vibration through the steel structure.

Tapered Roller is divided into cone up heart roll, cone down heart roll group, widely used in steel mills, power plants, wharf, coal mine and other transportation industries, it has wear resistance, impact resistance, aging, no noise, antistatic, self-lubrication does not tear the conveyor belt, reduce resistance suitable for long distance transmission to reduce energy consumption.NO.NumberNameWeight                Size1DTⅡ03C1211.1Tapered Roller5.6￠89×￠133-340-4G2042DTⅡ03C1222.1Tapered Roller5.6￠89×￠133-340-4G2053DTⅡ04C1223.1Tapered Roller7.0￠108×￠159-4

Spiral roller is an important part of belt conveyor. Its product structure design and function characteristics make it perform well in the environment of conveying sticky wet materials, with the characteristics of non-stick roller, strong self-cleaning force and non-stick belt. The spiral roller is easy to install, can provide smooth transmission, and has the advantages of low noise, low energy consumption and prolong the service life of the tape.

Conveyor Impact Bed is a kind of anti-flushing equipment specially designed for mining belt conveyor, with the characteristics of impact resistance, flame retardant and corrosion resistance. The Conveyor Impact Bed is mainly used to replace the traditional buffer roller. Through the high force of the material falls the impact force, greatly reducing the impact of the material falling on the conveyor belt, so as to improve the force of the drop point.

The friction roller is an important part of the belt conveyor, which is mainly divided into friction raising roller and lowering heart roller. The function of these rollers is to support the conveyor belt and material weight on the belt conveyor.

The roller is an important part of the belt conveyor, many kinds, large quantity, can support the conveyor belt and material weight. It accounts for 35% of the total cost of a belt conveyor, generating more than 70% of the resistance, so the quality of the roller is particularly important.

The comb roller has a hard rubber ring, which has a great effect to prevent the conveyor belt deviation and cleaning. It is specially used for the conveyor of sticky materials. Comcomb roll is applicable, including mining, wharf, coal, power plant, coking, export trade and other fields.

The Tooth Roller Crusher is suitable for crushing raw coal in coal mines or coal preparation plants, and can also be used for crushing other medium-low hard and brittle materials. Tooth Roller Crusher spacing is adjusted hydraulically, and the tooth roller bearings are centrally lubricated. The tooth shape adopts optimal design, selective crushing with tensile and shearing forces, and with features of high efficiency and low consumption, and even granulation.

Impact Crusher have the advantages of simple structure,high brcaking ratio,low energy consumption、the discharged granules are of high even degree and seldom over smash phenomenon,maintain convenient、granule degree be of large adjustment scope and can be broken selected.They are used in cement,fireproof materials in transportation(railway,highway and bridges)、coal、metallurgy and power construction ctc.industries for breaking medium and fine materials,such as rock、limestone、clinker、slag、coke,coal etc.Type PF-Ⅱ,PF-Ⅲ impact crushers have the following characteristics:breaking of hard rocks,wear-re

PCFK1413 reversible impact crusher is widely used in highways, coal, railroads, airports and other fields that require high shape of stone materials. The equipment has the following features and performance:1. Large crushing ratio and high crushing efficiency: through high-speed impact and repeated crushing, PCK1413 Reversible Impact Crusher is able to quickly crush large materials to the required size, and is suitable for all kinds of materials with compressive strength not exceeding 360 MPa.2.

Technical Specifications of PF 1210 lmpact CrusherThe rotor diameter is 1250mm, the rotor length is 1050 mm, the maximum feeding size is 350mm, the production capacity is 70-120t/h, the rotor speed is 508r / min, the motor power is 110KW, and the overall dimension (length x width x height) of PF 1210 impact crusher is 2945x3028x2809mm.An impact crusher is a crushing machine that uses impact energy to crush materials. The rotor rotates high speed when the machine is working, driven by the motor.

Product detailThe PCFK reversible impact hammer crusher uses a high-speed rotating hammer head to crush the coal that enters the crusher and rushes towards the impact plate,which can achieve crush in the process of repeated collisions.The impact plate adopts a two-arc suspension body, and the material is discharged from the middle of the end of the two impact plate bodies after crushed.

The conveyor transfer chutes is usually installed at the material collecting area of the belt conveyor, which plays the role of the material guiding centralizing to reduce the deviation of the belt and dust suppression and dust prevention. According to the different environment, it can be divided into a variety of structural types: general-purpose material conveyor transfer chutes, double-layer sealed material conveyor transfer chutes, fully enclosed material conveyor transfer chutes, non-powered dust-removing material conveyor transfer chutes, etc.

1.Model：PF-13152.Rotor length X length：ф1300×1500（mm）3.Max. feeding size：150~350（mm）4.Capacity：100~250（t/h）5.Power：180~315KW6.Overall size (LXWXH):2230×3515×1515mm7.Equipment wt.: excluding motor:23000KgNotes: The capacity listed in the table is obtained under following condition:1. Material to be crushed is ore.2.The anti-pressure strength of material of ore within 200MPa.3.Surface water content within 2%.4.Bulk density is 1.6t/m3.5.Feed material along full length of rotor evenly and continuously.An impact crusher is a crushing machine that uses impact energy to crush materials.

The advantages of PF1210 impact crusher are high crushing efficiency, low power consumption, uniform product size, can reduce the number of crushing stages, simple structure, large production capacity, impact crusher plate hammer and liner plate, etc. using high wear-resistant materials, simplify the production process, suitable for large and medium scale crushing production. It is applied to the crushing of large materials in metallurgy, building materials, mining, highway, mineral processing and other industries.NameParameterRotor length X length（mm）Φ1250×1000Max.

Powerful impact crusher is a new type of high-efficiency stone crushing equipment, is a new generation of impact crusher developed by combining the specific conditions of industrial and mining practice in the sand and gravel industry.

Impact Crusher machinery has the characteristics of good grain type, simple structure, durable, suitable for all kinds of coarse, medium and fine materials, such as side length not more than 500mm, compressive strength not more than 350MPa, such as granite, limestone, concrete, etc.NameParameterRotor length X length（mm）Φ500×400Max.

Tube belt conveyor is a new type belt conveyor developing from the basis of trough belt conveyor. The purpose of adopting the pipe belt conveyor is increasing the belt surround to the material which can reach the closed conveying to the material.

Impact Crusher is a kind of crushing equipment widely used in metallurgy, chemical industry, building materials, hydropower and other fields. It is especially suitable for the operation of mobile stone, such as highway, railway, water and electricity engineering, etc., which can adopt a variety of configuration forms according to the types and sizes of processing raw materials and the different requirements of finished materials.

The mobile conveyor tripper car on the belt conveyor is a new type of mobile unloading equipment commonly used in the conveyor system and is used in conjunction with the belt conveyor. It is widely used in storage and transportation places in the metallurgy, mining, power, and grain industries; equipped with a good ventilation and dust removal system, can greatly reduce pollution. It is an upgrade product of the original conveyor tripper car product and adapts to the new requirements of various industries for environmental protection of the working environment.

Mainly used for the sealing between the conveyor belt and the guide chute and the sealing between the buffer bed and guide chute.

General Belt Conveyor Shandong Shankuang researches and develops is a new style belt conveyor designed according to the mine and open pit coal mine digging and rock (waste) dumping process requirement. General Belt Conveyor is using for open pit digging and waste dumping area working surface, it is a kind of bulk material conveying equipment which is removable and configurable according to the operation requirement.

A conveyor will always consist of at least two pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required. Different kinds of conveyor pulleys ShanDongShanKkuang ® sells conveyor pulleys in all the following sub-categories:Head pulleysThe head pulley is located at the discharge point of the conveyor.

Reversible impact hammer crusher is a new type of crushing equipment, its crushing rotor can be forward or reversed. This kind of crusher is mainly by impact to crush materials, belongs to a new type of crusher equipment.1.Model：PCFK-20252.Rotor length X length：ф2000×2500（mm）3.Max. feeding size：80（mm）4.Finishing particle size：≤3（mm）4.Capacity：500（t/h）5.Power：1250KW6.Overall size (LXWXH):7874×4390×4530mm7.Equipment wt.: excluding motor:62000KgNotes: The capacity listed in the table is obtained under following condition:1.