1. Application scopeThe crusher is suitable for breaking loose and fragile material with tensile strength not less than 100MPa, such as cold coke and coal lump.2. Main technical parameter2.1、Roller diameter： ￠500 mm2.2、Roller working length： 1500 mm2.3、Roller revolution： 64/67.8 r/min2.4、Max. feed size： 300mm2.5、Max.
Contact Now
Double tooth roller crusher, belongs to the type of double roller machine, especially suitable for sinter, coal, cement, silicate, glass, ceramics and other industries, mainly used for the crushing of brittle materials below medium hardness, especially in the fine operation of ore. This crusher uses two rollers rotating opposite to each other to control the particle size of the material by adjusting the gap between the rollers, so as to realize the crushing of the material. The roller surface of the double-tooth roller crusher can be coarse or fine teeth.
Contact Now
Double Tooth Roll Crusher has the advantages of small size, large crushing ratio, low noise, simple structure, convenient maintenance, high productivity, uniform particle size of broken materials, low crushing rate, convenient maintenance, sensitive overload protection, safe and reliable characteristics. This machine mainly uses special abrresistant roller to split the material to form the mechanism of high productivity. The double-tooth roller is driven by the universal coupling, and the roller gap can be adjusted by the gaskets.
Contact Now
The performance advantages of the double-tooth roller crusher include the use of long teeth, small roller diameter, spiral cloth teeth, multi-disc four-tooth structure, which can handle powder and granular materials, and has low water content requirements. The design is usually driven by two motors, and the kinetic energy is more powerful, saving 45% of the same capacity.
Contact Now
Double-tooth roller crusher, roller surface shape can be divided into thick and thin tooth roller, can be adjusted according to the size of the material required for the production, suitable for brittle and soft materials. Double-tooth roller crusher is suitable for sinter, coal, cement, silicate, glass, ceramics and other industries, suitable for the crushing of brittle materials below medium hardness, mainly used for the fine crushing operation of ore.NameParameterRotor length X length（mm） Φ900×900Max.
Contact Now
Double tooth roller crusher, also known as 2 PGC of roller crusher, is mainly used in ore operations, by transmission device, frame part, crushing roller, mechanical spring device, linkage mechanism, etc., and the wear-resistant tooth roller high-speed rotation of material split, instant hard broken, not broken, formed the mechanism of high productivity, operation and maintenance is more convenient.
Contact Now
1、 Application The crusher is suitable for breaking loose and fragile material with tensile strength not less than 100 MPa such as cold coke and coal lump.2、 Main technical data2.1、roller diameter ￠700 mm2.2、Roller working length 1500 mm2.3、roller revolution 75 r/min2.4、Max.
Contact Now
The double roll crusher is a common crushing equipment used to break raw materials to the desired particle size. It usually consists of two or more parallel rotating rollers, and the gap between the rollers can be adjusted to control the broken particle size.
Contact Now
The tooth roller crusher is suitable for crushing raw coal in coal mines or coal preparation plants, and can also be used for crushing other medium-low hard and brittle materials. The tooth roller spacing is adjusted hydraulically, and the tooth roller bearings are centrally lubricated. The tooth shape adopts optimal design, selective crushing with tensile and shearing forces, and with features of high efficiency and low consumption, and even granulation.
Contact Now
The working principle of the double-tooth roller crusher is based on the action of rolling force and grinding force. When the material enters the crushing cavity, it is forced between the two rollers by the rodent force of the rotating roller, and the squeezing and grinding of the roller, making the material break. The broken small particles are thrown along the tangent direction of the roller rotation and under the machine through the gap between the two roller axes, forming the finished product.
Contact Now
1. APPLICABLE SCOPEThe double roll crusher is suitable for metallurgy, building materials, refractory materials and other industrial crushing and high hardness materials. This series of roller crusher is mainly composed of roller wheel, roller support bearing, pressing and regulating device and driving device and other parts. Grain size adjustment: a wedge or gasket adjustment device is installed between the two roller wheels, and the top of the wedge device is installed with the adjustment bolt.
Contact Now
hydraulic jaw crusher is suitable for coarse and medium crushing operations under harsh conditions with extremely hard and strong foreign matter in the material, especially for the treatment of steel slag. It adopts hydraulic support device and has functions of overload protection. The feeding particle size is not more than 425 mm. the product has the advantages of simple structure, reliable performance, convenient operation, safe use and so on. Main models: PEY400X600，PEY400X750，PEY500X750, PEY 600X900 and other models.
Contact Now
The type includes 2PG series double roller crusher and 4PG series four roller crusher.2PG double roller crusherMain models: 2PG400x250, 2PG610 x 400, 2PG750 x 500, 2PG750 x 700, 2PG750 x 1000，2PG900x 900, 2PG1000x800, 2PG1200 x 1000 and so on.4PG series four roller crusherMain models:4G900 x700,4G1000x900, 4PG1200 x 1000, etc.
Contact Now
Hydraulic jaw crusher is widely used in metallurgy, mining, building materials, chemical industry, coal and other industries, mainly used in primary crushing products. Through its own constant vibration, it can clip large stones into small pieces, which is suitable for crushing the rock after blasting to facilitate transportation and use. In addition, the hydraulic jaw crusher also has the function of overload protection.
Contact Now
The Tooth Roller Crusher is suitable for crushing raw coal in coal mines or coal preparation plants, and can also be used for crushing other medium-low hard and brittle materials. Tooth Roller Crusher spacing is adjusted hydraulically, and the tooth roller bearings are centrally lubricated. The tooth shape adopts optimal design, selective crushing with tensile and shearing forces, and with features of high efficiency and low consumption, and even granulation.
Contact Now
It is a medium and fine crusher with a simple, compact and light construction. Such crusher has large adjustment range of grain size and cutting device for repairing wear roll, which can easily adapt to humid material and is good at discharging material smoothly.
Contact Now
1. APPLICABLE SCOPEThe roller crusher is a common crushing equipment, widely used in mining, metallurgy, building materials, chemical and other industries. Its main function is to break the bulk material into smaller particles through the rotation of the double rollers to meet the needs of the subsequent process. The roller crusher has the characteristics of high efficiency crushing, uniform particle size, strong adaptability and simple maintenance.
Contact Now
Four-roll crusher is a kind of medium and fine crushing products supporting metallurgical mining equipment. It breaks the required granular material by adjusting the gap of the upper and lower rollers.
Contact Now
The reversible impact hammer crusher is mainly composed of the crusher host, electric motor, hydraulic coupling, hydraulic station, shock absorption system, etc.
Contact Now
Heavy ring hammer crusher is suitable for coal crushing in the power plant, with large output, uniform discharge particle size, hydraulic shell opening, and convenient maintenance.
Contact Now
The working principle of the four-roll crusher is to use the high extrusion pressure and shear force generated by the relative rotation of the four high-strength wear-resistant alloy rollers to crush the material. The four-roller crusher integrates the primary and secondary crushing of materials, with compact structure, uniform particle size of broken materials, and less overcrushing ratio.
Contact Now
Hydraulic jaw crusher is suited for breaking coarse and middle sized material blended with extra hard foreign matters, especially suitable for steel slag breaking. This kind of crusher use hydraulic supporting device, have the overload protection function.
Contact Now
The roller crusher is suitable for medium and fine crushing of materials with compressive strength less than 250 Mp, such as crushed pebble, limestone, iron ore, quartz, potassium feldspar, silicon metal, barite, basalt, granite, steel slag, cement clinker, etc. It has the characteristics of low maintenance cost, low water requirements, reliable performance, less power consumption, less dust and low noise.MAIN TECHNICAL PARAMETERItemsParameterRoller Diameter（mm）Φ410Max.
Contact Now
Impact Crusher machinery has the characteristics of good grain type, simple structure, durable, suitable for all kinds of coarse, medium and fine materials, such as side length not more than 500mm, compressive strength not more than 350MPa, such as granite, limestone, concrete, etc.NameParameterRotor length X length（mm）Φ500×400Max.
Contact Now
