The main shaft of reversible counterattack hammer crusher is made of high quality alloy forged steel, and the material and heat treatment technology have been very mature in the application of large surface shaft parts for decades. The hammer heads are combined, thus saving a lot of wear-resistant alloy materials and reducing production costs.
Contact Now
Ring hammer crusher is mainly composed of frame, transmission shaft, rotor, counterattack cavity and other parts. The shell of heavy hammer crusher is welded with steel plate, which is divided into upper and lower parts, which is connected by bolts. In order to avoid wear and deformation of the inner wall of the box under the impact of the material, the shell is inlaid with protective lining plate. The rotor is composed of the rotor shaft, disk, hammer shaft, ring hammer, board hammer and other parts.
Contact Now
Jaw crusher is powered by electric motor, driving the eccentric shaft through the belt drive, so that the moving jaw makes reciprocating movement according to the predetermined track, so as to break the material into the crushing cavity composed of fixed jaw plate, movable jaw plate and side guard plate, and unload the finished material through the lower discharge port.
Contact Now
Jaw crusher, referred to as jaw breaker, consists of two jaw plates of dynamic Hubei and static jaw, which simulate the jaw movement of animals and complete the material crushing operation. It is widely used in mining, smelting, building materials, highway, railway, water conservancy and chemical industry, and the compressive strength of the crushed materials is 250 Mpa. Jaw crusher is mainly used as coarse and medium sher in mining, building materials, infrastructure and other departments.NameParameterRotor length X length（mm）Φ250×400Max.
Contact Now
Jaw crusher is suitable for the crushing of various materials, including but not limited to river pebble, granite, quartz, basalt, limestone, etc. It has a wide range of application scenarios, not only limited to the mining and building materials industry, but also including highway construction, bridge construction, water conservancy engineering and other fields.NameParameterRotor length X length（mm）Φ150×250Max.
Contact Now
Fine Crushing Jaw Crusher is suitable for crushing hard materials, such as limestone, iron ore, iron ore, phosphate ore, copper ore, silica ore, quartz ore, ceramics and solid materials of comparable hardness.NameParameterRotor length X length（mm） Φ300×1300Max.
Contact Now
Jaw crusher can be divided into three types according to the inlet width: large, medium and small. The inlet width of large machines is more than 600mm, and the inlet width of medium machines is between 300-600mm, while the inlet width of small machines is less than 300mm. This classification enables the jaw crusher to adapt to application scenarios of different sizes and production requirements.NameParameterRotor length X length（mm） Φ500×750Max.
Contact Now
Fine jaw crusher is suitable for all kinds of ore and rock, widely used in mining, metallurgy, construction, chemical and other departments of crushing hard and hard materials, the most suitable for dressing plant ore and chemical plant raw materials of coarse, crushing, is one of the most commonly used crusher.NameParameterRotor length X length（mm） Φ250×750Max.
Contact Now
Fine crushing jaw crusher is a kind of efficient equipment used for crushing hard materials, especially suitable for the crushing of ore and rock, widely used in mining, metallurgy, construction, chemical industry and other fields. It can deal with all kinds of hardness and medium hardness materials, including but not limited to limestone, iron ore, steel slag, phosphate ore, copper ore, silicon ore, quartz stone, etc., and is suitable for secondary medium crushing operations.NameParameterRotor length X length（mm） Φ250×1500Max.
Contact Now
Head Drive Pulley, Return Pulley,Bend Pulley, Snub Pulley,Tensioning Pulley, Take up Pulley can be provided.We are designing and manufacturing pulleys, using materials of the highest quality in a production process employing advanced technology.
Contact Now
PCFK1413 reversible impact crusher is widely used in highways, coal, railroads, airports and other fields that require high shape of stone materials. The equipment has the following features and performance:1. Large crushing ratio and high crushing efficiency: through high-speed impact and repeated crushing, PCK1413 Reversible Impact Crusher is able to quickly crush large materials to the required size, and is suitable for all kinds of materials with compressive strength not exceeding 360 MPa.2.
Contact Now
1.Model：PF-13152.Rotor length X length：ф1300×1500（mm）3.Max. feeding size：150~350（mm）4.Capacity：100~250（t/h）5.Power：180~315KW6.Overall size (LXWXH):2230×3515×1515mm7.Equipment wt.: excluding motor:23000KgNotes: The capacity listed in the table is obtained under following condition:1. Material to be crushed is ore.2.The anti-pressure strength of material of ore within 200MPa.3.Surface water content within 2%.4.Bulk density is 1.6t/m3.5.Feed material along full length of rotor evenly and continuously.An impact crusher is a crushing machine that uses impact energy to crush materials.
Contact Now
The advantages of PF1210 impact crusher are high crushing efficiency, low power consumption, uniform product size, can reduce the number of crushing stages, simple structure, large production capacity, impact crusher plate hammer and liner plate, etc. using high wear-resistant materials, simplify the production process, suitable for large and medium scale crushing production. It is applied to the crushing of large materials in metallurgy, building materials, mining, highway, mineral processing and other industries.NameParameterRotor length X length（mm）Φ1250×1000Max.
Contact Now
We hope--we pursue the zenith of technology and quality--as our management concept all the time.
Contact Now
Reversible impact hammer crusher is a new type of crushing equipment, its crushing rotor can be forward or reversed. This kind of crusher is mainly by impact to crush materials, belongs to a new type of crusher equipment.1.Model：PCFK-20252.Rotor length X length：ф2000×2500（mm）3.Max. feeding size：80（mm）4.Finishing particle size：≤3（mm）4.Capacity：500（t/h）5.Power：1250KW6.Overall size (LXWXH):7874×4390×4530mm7.Equipment wt.: excluding motor:62000KgNotes: The capacity listed in the table is obtained under following condition:1.
Contact Now
The crushing ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1210ii2.Rotor length X length：ф1250×1050（mm）3.Max.
Contact Now
The crushing ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1214ii2.Rotor length X length：ф1250×1400（mm）3.Max.
Contact Now
Powerful impact crusher is a new type of high-efficiency stone crushing equipment, is a new generation of impact crusher developed by combining the specific conditions of industrial and mining practice in the sand and gravel industry.
Contact Now
Trolley Locomotive is a traction device for rail vehicle transportation, which use the traction motor as power to drive the wheels to rotate and with the help of friction between the wheels and the rail surface to enable the locomotive runs on the track. It is mainly used for underground transportation and long-distance transportation on the ground.
Contact Now
Impact Crusher is a kind of crushing equipment widely used in metallurgy, chemical industry, building materials, hydropower and other fields. It is especially suitable for the operation of mobile stone, such as highway, railway, water and electricity engineering, etc., which can adopt a variety of configuration forms according to the types and sizes of processing raw materials and the different requirements of finished materials.
Contact Now
Polyurethane pulleys are a type of pulley made using polyurethane material and are widely used in various industrial equipment.
Contact Now
Advantages of Electric Trolley Mining LocomotiveThe vector control transformer,AC frequency change electric motor and new locomotive cabinet designed and developed by yourself. The products has good sticking, good overload ability, good climbing, safety braking, big traction and easy to operate.Human oriented design, the operation table of driver cab has speed/odometer display and locomotive running signal lamp.Energy-saving, 25% energy saved compared to DC driving. The products can adapt mining working environment, accepted
Contact Now
This kind of screen is mainly used in coal, metallurgy, mine, power plant, construction material industry, water conservancy project, light industry and chemical industry.
Contact Now
