MB series rod mills are widely used in the primary grinding of artificial stone sand, metallurgical steel slag processing, mineral processing plants, power departments and chemical plants. The grinding body contained in the barrel of the rod mill is a steel rod, generally using a wet overflow type. The mill has the characteristics of uniform product size, less over-crushing phenomenon, higher grinding efficiency, and easy replacement of worn parts.
Contact Now
The main shaft of reversible counterattack hammer crusher is made of high quality alloy forged steel, and the material and heat treatment technology have been very mature in the application of large surface shaft parts for decades. The hammer heads are combined, thus saving a lot of wear-resistant alloy materials and reducing production costs.
Contact Now
The coal block is crushed initially after entering the crusher under the impact of the high-speed rotating ring hammer, and then crushed again when rushed to the crushing plate and sieve plate at high speed. Meanwhile, the coal blocks also collide with each other. The impacted coal is sheared and crushed between the ring hammer and the crushing plate and sieve plate, flowing from top to bottom, continuously crushed, and discharged from the sieve hole after reaching the required particle size.
Contact Now
Tapered Roller is divided into cone up heart roll, cone down heart roll group, widely used in steel mills, power plants, wharf, coal mine and other transportation industries, it has wear resistance, impact resistance, aging, no noise, antistatic, self-lubrication does not tear the conveyor belt, reduce resistance suitable for long distance transmission to reduce energy consumption.NO.NumberNameWeight Size1DTⅡ03C1211.1Tapered Roller5.6￠89×￠133-340-4G2042DTⅡ03C1222.1Tapered Roller5.6￠89×￠133-340-4G2053DTⅡ04C1223.1Tapered Roller7.0￠108×￠159-4
Contact Now
Hammer Crusher is Single rotor, irreversible hammer crusher, the impact of the hammer to crush brittle materials or medium hardness minerals (such as coal, salt, limestone, gypsum, etc.), but can not be used with toughness, fibrous and humidity compared with the hammer crusher characteristics: crushing ratio is large, so it is suitable for use under the requirement of small size.NameParameterRotor length X length（mm） Φ800×600Max.
Contact Now
Impact Crusher is a kind of crushing equipment widely used in metallurgy, chemical industry, building materials, hydropower and other fields. It is especially suitable for the operation of mobile stone, such as highway, railway, water and electricity engineering, etc., which can adopt a variety of configuration forms according to the types and sizes of processing raw materials and the different requirements of finished materials.
Contact Now
This Impact Crusher 1000×1000m is a new type of crusher designed by introducing and absorbing the latest technology at home and abroad.It is suitable for crushing materials with compressive strength ≤350 MPa and is widely used in highway, railroad, high strength dam and other projects.It is widely used in highway, railway, high-strength dams and other projects to crush rocks and construction waste (such as bricks, concrete blocks, etc.).NameParameterRotor length X length（mm）Φ1000×1000Max.
Contact Now
Reversible impact hammer crusher is one of the main equipment of fine limestone, coal or other brittle materials below medium hardness in metallurgy, building materials, chemical and hydropower industries.
Contact Now
The reversible impact hammer crusher is a mechanical equipment specially designed for crushing medium-hardness brittle materials. This type of crusher is particularly suitable for processing materials such as raw coal and various other brittle materials.
Contact Now
We hope--we pursue the zenith of technology and quality--as our management concept all the time.
Contact Now
YA series vibrating screen, with circular movement, is mainly applied to metallurgical, mining, power plant, water conservancy project, building material, light industry and chemical industry, which is a high-effective sieving machine for sizing bulk material such as coal, ore and coke. This series of vibrating screen has 40 kinds of specifications, including heavy-duty screen for sizing large grain and light-duty for medium or small grain. The screen can be divided into single or double screen according to screening method.
Contact Now
The company, as a vice chairman unit of breaking and grinding sub-association of China Heavy Machinery Industry Association, has been closely combining with industry trends and requirements of the users, actively. studying new technologies and new processes in the world, constantly optimizing product structure and improving product property and processing capabilities. At present, breaking series of products have moved towards automation, whole set and large-scale, energy-economical and environmental orientation,with property index of most products
Contact Now
1. Roller diameter： φ1600mm2. Rotor length: 2524mm3.Rotor quality： 13876kg4.Max.
Contact Now
Adopt triangle belt driving between motor and reducer. The triangle belt will slip if load is too big, which can protect the motor. The connection between the swing roller part and reducer adopts universal spindle coupling, which not only make sure the swing roller have enough adjusting range but also protect the motor and reducer in case that damage due to overload. The roller part is the hardcore part of the crusher.
Contact Now
Belt conveyor is a series of products in coal mine, is the whole core flame retardant belt, nylon flame retardant belt, polyester canvas flame retardant belt and steel rope core flame retardant belt for traction components of continuous conveying equipment, mainly used in coal mine and coal preparation plant ground with the use of flammable and explosive gas, used to transport all kinds of bulk materials and materials.
Contact Now
Impact Roller Idlers:Impact rollers are used as carrying rollers instead of normal steel rollers at a loading point. On steel roller there are rubber rings assembled, side by side, to absorb the weight and impact of material falling onto the belt. At the same time impact rollers reduce the shock and vibration through the steel structure.
Contact Now
The MQS series wet lattice ball mill is a device to grind ores and other materials of various hardness, which can be widely used as the main equipment for grinding operations in metal beneficiation, building materials, and chemical industry. It is called a lattice ball mill because the ore discharge grid is installed at the end of the ore discharge. Lattice ball mill consists of transmission part, rotary part, main bearing, feeding and discharging device, lubrication part and electric control part.
Contact Now
MQY series overflow ball mill is used to grind ores and other materials of various kinds of hardness. It can be widely used as the main equipment for grinding operations in industries such as metal beneficiation, building materials and chemical industry. It is called an overflow ball mill because the end of the ore discharge is based on the ore slurry level.
Contact Now
The crushing ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1210ii2.Rotor length X length：ф1250×1050（mm）3.Max.
Contact Now
The crushing ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1214ii2.Rotor length X length：ф1250×1400（mm）3.Max.
Contact Now
Strength Impact Crusher ratio is large, about 40, up to 150. The feeding size of the counterattack crusher is up to 2m3. The product particle size is less than 25mm, which can be directly put into the mill, and the product particle size of the finely broken counterattack crusher is less than 3mm. The selection of counterattack crusher can reduce the number of broken segments.1.Model：PF-1007ii2.Rotor length X length：ф1000×700（mm）3.Max.
Contact Now
This kind of screen is mainly used in coal, metallurgy, mine, power plant, construction material industry, water conservancy project, light industry and chemical industry.
Contact Now
Jaw crusher can be divided into three types according to the inlet width: large, medium and small. The inlet width of large machines is more than 600mm, and the inlet width of medium machines is between 300-600mm, while the inlet width of small machines is less than 300mm. This classification enables the jaw crusher to adapt to application scenarios of different sizes and production requirements.NameParameterRotor length X length（mm） Φ500×750Max.
Contact Now
