Drive/Head Pulley - A conveyor pulley used for the purpose of driving a conveyor belt. Typically mounted in external bearings and driven by an external drive source.Drive Drum is the main component of power transmission. The drum can be divided into single drum (the angle of the belt to the drum is 210°~ 230°)，Double Drum (the angle of the belt to the drum is up to 350°) and multi-drum (used for high power)
Contact Now
Polyurethane pulleys are a type of pulley made using polyurethane material and are widely used in various industrial equipment.
Contact Now
Head Drive Pulley, Return Pulley,Bend Pulley, Snub Pulley,Tensioning Pulley, Take up Pulley can be provided.We are designing and manufacturing pulleys, using materials of the highest quality in a production process employing advanced technology.
Contact Now
Cold sticky pulley is a new type of pulley bonding method compared with the traditional pulley hot vulcanization casting method.Pulley cold bonding has been widely used in rubber surface coating of conveyor pulley in mining, port, power plant, metallurgy, cement, coal mine and other industries.
Contact Now
Trolley Locomotive is a traction device for rail vehicle transportation, which use the traction motor as power to drive the wheels to rotate and with the help of friction between the wheels and the rail surface to enable the locomotive runs on the track. It is mainly used for underground transportation and long-distance transportation on the ground.
Contact Now
Bend Pulley - A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system.The bend pulley is used for changing the direction of the belt. The bend pulley is usually installed at the tail part or the vertical take-up equipment part when the belt direction need to 180°bending.
Contact Now
A conveyor will always consist of at least two pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required. Different kinds of conveyor pulleys ShanDongShanKkuang ® sells conveyor pulleys in all the following sub-categories:Head pulleysThe head pulley is located at the discharge point of the conveyor.
Contact Now
The MLTB series edge drive wet desulfurization ball mill is a special ball mill with limestone and gypsum wet flue gas desulfurization system developed by the company that absorbs the world's advanced technology. It is used for the preparation of limestone slurry, and its performance reaches the international advanced level. Compared with other types of ball mills, it has features of environmental protection, energy saving, simple maintenance, reliable operation, and high degree of automation.
Contact Now
Product description:MLT series compact center drive wet desulfurization ball mill is a special ball mill for limestone and gypsum wet flue gas desulfurization system developed by the company by introducing the world's advanced technology. It is used for the preparation of limestone slurry, and its performance reaches the international advanced level. Compared with other types of ball mills, it has features of environmental protection, energy saving, compact structure, light weight, easy installation and maintenance, reliable operation, and high degree of automation.
Contact Now
The slag discharge drum is used in the belt conveyor. The principle of the slag discharge drum has a long hole parallel to the axial direction. When the return belt has the material, the material can enter the long hole and enter the drum. On the inside of the drum is a double cone with two points thick middle, with holes at both ends of the drum. After the axial long hole on the surface of the drum and is discharged into the yard through the cone and the end hole. It avoids the shelf pressure and wear of the belt at the changing roller, and improves the service life of the belt.
Contact Now
Jaw crusher is powered by electric motor, driving the eccentric shaft through the belt drive, so that the moving jaw makes reciprocating movement according to the predetermined track, so as to break the material into the crushing cavity composed of fixed jaw plate, movable jaw plate and side guard plate, and unload the finished material through the lower discharge port.
Contact Now
Belt Conveyors For Metallurgy is a kind of efficient material conveying equipment, which is widely used in various industrial fields. It realizes continuous movement through friction drive, and is used to transport scattered materials or component objects. The main characteristics of metal belt conveyor include strong transportation capacity, low power consumption, long transportation distance, long service life, and small crushing effect on materials, smooth operation, low noise, can adapt to the upstream and downhill transmission.
Contact Now
The Tooth Roller Crusher is suitable for crushing raw coal in coal mines or coal preparation plants, and can also be used for crushing other medium-low hard and brittle materials. Tooth Roller Crusher spacing is adjusted hydraulically, and the tooth roller bearings are centrally lubricated. The tooth shape adopts optimal design, selective crushing with tensile and shearing forces, and with features of high efficiency and low consumption, and even granulation.
Contact Now
Ring hammer crusher is one of crushing equipment, but also a kind of hammer crusher series technology advanced equipment, its role is to smash the stone into finished material. Heavy hammer crusher is an advanced high power, high crushing ratio, high productivity crusher, and broke through the previous crushing principle of crushing equipment, can be reasonably adjusted according to the nature of the material, in the output, power is better.NameParameterRotor length X length（mm）Φ800×800Max.
Contact Now
Main application of hammer crusher:Hammer crusher is used to crush all kinds of medium hard and weak abrasive materials. The compressive strength of the material is not more than 100MPa，and the moisture content is less than 15%. The crushed materials are coal, salt, chalk, gypsum, brick, limestone, etc.It can also be used to crush wood, paper or waste of asbestos cement with fiber structure, strong elasticity and toughness to recover asbestos fiber, etc. In addition, hammer crusher can not only be used in crushing production
Contact Now
Product description：The hammer crusher is suitable for various materials such as crushing brittle, medium hard, surface moisture not exceeding 2% and compressive strength not exceeding 150MPa. It is used for crushing or fine crushing coal, coal gangue, limestone, shale, feldspar, gypsum, coke, brick and tile, limonite, crushed stone, salt and sulfur, and phosphate ore in many industries such as coal, metallurgy, building materials, chemical industry, power and other departments.
Contact Now
Heavy ring hammer crusher is an efficient crushing equipment, especially suitable for crushing a variety of medium hardness and brittle materials, such as limestone, coal, etc.
Contact Now
Heavy ring hammer crusher is suitable for coal crushing in the power plant, with large output, uniform discharge particle size, hydraulic shell opening, and convenient maintenance.
Contact Now
Heavy-duty Ring Hammer Crusher is a new product developed, suitable for power plant crushing coal crushing, large output, up to 200-2000T / H.1.Rotor diameter：1200（mm）2.Rotor length ：4465（mm）3.Feed particle size：≤400（mm）4.Finishing particle size：≤25（mm）5.Capacity：1200（t/h）6.Power：630KW7.Overall size (LXWXH):7312×3460×1950mm8.Equipment wt.: excluding motor:42000Kg
Contact Now
Ring hammer crusher is suitable for crushing all kinds of brittle materials, such as coal, coal rock, coke carbon, slag, shale, loose limestone, etc. The compressive strength of the material shall not exceed 10MPa, and the surface moisture shall not be greater than 8%.NameParameterRotor length X length（mm） Φ600×400Max. feeding size（mm）200Final grain size（mm）30Capacity（m³/h） 22-33MotorType Y180L—8Power（KW）18.5revolution（r/min）970Dimension (L*W*H)（mm）1050×1270×800Machine weight（Kg）1430
Contact Now
Hammer crusher is a kind of equipment: single rotor and double rotor. It is a crusher that directly breaks a material of 600-1800 mm to 25 or 25 mm or less. Hammer crusher is suitable for cement, chemical, electric power, metallurgy and other industrial sectors broken medium hardness materials, such as limestone, slag, coke, coal and other materials in the crushing and fine crushing operation.NameParameterRotor length X length（mm） Φ600×400Max.
Contact Now
Technical Specifications of PF 1210 lmpact CrusherThe rotor diameter is 1250mm, the rotor length is 1050 mm, the maximum feeding size is 350mm, the production capacity is 70-120t/h, the rotor speed is 508r / min, the motor power is 110KW, and the overall dimension (length x width x height) of PF 1210 impact crusher is 2945x3028x2809mm.An impact crusher is a crushing machine that uses impact energy to crush materials. The rotor rotates high speed when the machine is working, driven by the motor.
Contact Now
1.Model：PF-13152.Rotor length X length：ф1300×1500（mm）3.Max. feeding size：150~350（mm）4.Capacity：100~250（t/h）5.Power：180~315KW6.Overall size (LXWXH):2230×3515×1515mm7.Equipment wt.: excluding motor:23000KgNotes: The capacity listed in the table is obtained under following condition:1. Material to be crushed is ore.2.The anti-pressure strength of material of ore within 200MPa.3.Surface water content within 2%.4.Bulk density is 1.6t/m3.5.Feed material along full length of rotor evenly and continuously.An impact crusher is a crushing machine that uses impact energy to crush materials.
Contact Now
The reversible impact hammer crusher is mainly composed of the crusher host, electric motor, hydraulic coupling, hydraulic station, shock absorption system, etc.
Contact Now
