Impact Crusher is a kind of crushing equipment widely used in metallurgy, chemical industry, building materials, hydropower and other fields. It is especially suitable for the operation of mobile stone, such as highway, railway, water and electricity engineering, etc., which can adopt a variety of configuration forms according to the types and sizes of processing raw materials and the different requirements of finished materials.
Contact Now
Jaw crusher can be divided into three types according to the inlet width: large, medium and small. The inlet width of large machines is more than 600mm, and the inlet width of medium machines is between 300-600mm, while the inlet width of small machines is less than 300mm. This classification enables the jaw crusher to adapt to application scenarios of different sizes and production requirements.NameParameterRotor length X length（mm） Φ500×750Max.
Contact Now
Four-roll crusher is a kind of medium and fine crushing products supporting metallurgical mining equipment. It breaks the required granular material by adjusting the gap of the upper and lower rollers.
Contact Now
The double roll crusher is a common crushing equipment used to break raw materials to the desired particle size. It usually consists of two or more parallel rotating rollers, and the gap between the rollers can be adjusted to control the broken particle size.
Contact Now
It is a medium and fine crusher with a simple, compact and light construction. Such crusher has large adjustment range of grain size and cutting device for repairing wear roll, which can easily adapt to humid material and is good at discharging material smoothly.
Contact Now
The working principle of the four-roll crusher is to use the high extrusion pressure and shear force generated by the relative rotation of the four high-strength wear-resistant alloy rollers to crush the material. The four-roller crusher integrates the primary and secondary crushing of materials, with compact structure, uniform particle size of broken materials, and less overcrushing ratio.
Contact Now
1. APPLICABLE SCOPEThe double roll crusher is suitable for metallurgy, building materials, refractory materials and other industrial crushing and high hardness materials. This series of roller crusher is mainly composed of roller wheel, roller support bearing, pressing and regulating device and driving device and other parts. Grain size adjustment: a wedge or gasket adjustment device is installed between the two roller wheels, and the top of the wedge device is installed with the adjustment bolt.
Contact Now
The conveyor transfer chutes is usually installed at the material collecting area of the belt conveyor, which plays the role of the material guiding centralizing to reduce the deviation of the belt and dust suppression and dust prevention. According to the different environment, it can be divided into a variety of structural types: general-purpose material conveyor transfer chutes, double-layer sealed material conveyor transfer chutes, fully enclosed material conveyor transfer chutes, non-powered dust-removing material conveyor transfer chutes, etc.
Contact Now
Double Tooth Roll Crusher has the advantages of small size, large crushing ratio, low noise, simple structure, convenient maintenance, high productivity, uniform particle size of broken materials, low crushing rate, convenient maintenance, sensitive overload protection, safe and reliable characteristics. This machine mainly uses special abrresistant roller to split the material to form the mechanism of high productivity. The double-tooth roller is driven by the universal coupling, and the roller gap can be adjusted by the gaskets.
Contact Now
The MLTB series edge drive wet desulfurization ball mill is a special ball mill with limestone and gypsum wet flue gas desulfurization system developed by the company that absorbs the world's advanced technology. It is used for the preparation of limestone slurry, and its performance reaches the international advanced level. Compared with other types of ball mills, it has features of environmental protection, energy saving, simple maintenance, reliable operation, and high degree of automation.
Contact Now
Product description:MLT series compact center drive wet desulfurization ball mill is a special ball mill for limestone and gypsum wet flue gas desulfurization system developed by the company by introducing the world's advanced technology. It is used for the preparation of limestone slurry, and its performance reaches the international advanced level. Compared with other types of ball mills, it has features of environmental protection, energy saving, compact structure, light weight, easy installation and maintenance, reliable operation, and high degree of automation.
Contact Now
Adopt triangle belt driving between motor and reducer. The triangle belt will slip if load is too big, which can protect the motor. The connection between the swing roller part and reducer adopts universal spindle coupling, which not only make sure the swing roller have enough adjusting range but also protect the motor and reducer in case that damage due to overload. The roller part is the hardcore part of the crusher.
Contact Now
Tapered Roller is divided into cone up heart roll, cone down heart roll group, widely used in steel mills, power plants, wharf, coal mine and other transportation industries, it has wear resistance, impact resistance, aging, no noise, antistatic, self-lubrication does not tear the conveyor belt, reduce resistance suitable for long distance transmission to reduce energy consumption.NO.NumberNameWeight Size1DTⅡ03C1211.1Tapered Roller5.6￠89×￠133-340-4G2042DTⅡ03C1222.1Tapered Roller5.6￠89×￠133-340-4G2053DTⅡ04C1223.1Tapered Roller7.0￠108×￠159-4
Contact Now
The tooth roller crusher is suitable for crushing raw coal in coal mines or coal preparation plants, and can also be used for crushing other medium-low hard and brittle materials. The tooth roller spacing is adjusted hydraulically, and the tooth roller bearings are centrally lubricated. The tooth shape adopts optimal design, selective crushing with tensile and shearing forces, and with features of high efficiency and low consumption, and even granulation.
Contact Now
The roller crusher is suitable for medium and fine crushing of materials with compressive strength less than 250 Mp, such as crushed pebble, limestone, iron ore, quartz, potassium feldspar, silicon metal, barite, basalt, granite, steel slag, cement clinker, etc. It has the characteristics of low maintenance cost, low water requirements, reliable performance, less power consumption, less dust and low noise.MAIN TECHNICAL PARAMETERItemsParameterRoller Diameter（mm）Φ410Max.
Contact Now
The type includes 2PG series double roller crusher and 4PG series four roller crusher.2PG double roller crusherMain models: 2PG400x250, 2PG610 x 400, 2PG750 x 500, 2PG750 x 700, 2PG750 x 1000，2PG900x 900, 2PG1000x800, 2PG1200 x 1000 and so on.4PG series four roller crusherMain models:4G900 x700,4G1000x900, 4PG1200 x 1000, etc.
Contact Now
Double tooth roller crusher, also known as 2 PGC of roller crusher, is mainly used in ore operations, by transmission device, frame part, crushing roller, mechanical spring device, linkage mechanism, etc., and the wear-resistant tooth roller high-speed rotation of material split, instant hard broken, not broken, formed the mechanism of high productivity, operation and maintenance is more convenient.
Contact Now
The performance advantages of the double-tooth roller crusher include the use of long teeth, small roller diameter, spiral cloth teeth, multi-disc four-tooth structure, which can handle powder and granular materials, and has low water content requirements. The design is usually driven by two motors, and the kinetic energy is more powerful, saving 45% of the same capacity.
Contact Now
Shankuang Company has established a professional manufacturing company specializing in carrier rollers for belt conveyors---- Shandong Shankuang Roller Manufacturing Co.,Ltd. The Company has an automated production line of carrier rollers and can produce various types of carrier rollers.
Contact Now
1. APPLICABLE SCOPEThe roller crusher is a common crushing equipment, widely used in mining, metallurgy, building materials, chemical and other industries. Its main function is to break the bulk material into smaller particles through the rotation of the double rollers to meet the needs of the subsequent process. The roller crusher has the characteristics of high efficiency crushing, uniform particle size, strong adaptability and simple maintenance.
Contact Now
Double-tooth roller crusher, roller surface shape can be divided into thick and thin tooth roller, can be adjusted according to the size of the material required for the production, suitable for brittle and soft materials. Double-tooth roller crusher is suitable for sinter, coal, cement, silicate, glass, ceramics and other industries, suitable for the crushing of brittle materials below medium hardness, mainly used for the fine crushing operation of ore.NameParameterRotor length X length（mm） Φ900×900Max.
Contact Now
Double tooth roller crusher, belongs to the type of double roller machine, especially suitable for sinter, coal, cement, silicate, glass, ceramics and other industries, mainly used for the crushing of brittle materials below medium hardness, especially in the fine operation of ore. This crusher uses two rollers rotating opposite to each other to control the particle size of the material by adjusting the gap between the rollers, so as to realize the crushing of the material. The roller surface of the double-tooth roller crusher can be coarse or fine teeth.
Contact Now
The working principle of the double-tooth roller crusher is based on the action of rolling force and grinding force. When the material enters the crushing cavity, it is forced between the two rollers by the rodent force of the rotating roller, and the squeezing and grinding of the roller, making the material break. The broken small particles are thrown along the tangent direction of the roller rotation and under the machine through the gap between the two roller axes, forming the finished product.
Contact Now
1. Application scopeThe crusher is suitable for breaking loose and fragile material with tensile strength not less than 100MPa, such as cold coke and coal lump.2. Main technical parameter2.1、Roller diameter： ￠500 mm2.2、Roller working length： 1500 mm2.3、Roller revolution： 64/67.8 r/min2.4、Max. feed size： 300mm2.5、Max.
Contact Now
