Ring hammer crusher is mainly composed of frame, transmission shaft, rotor, counterattack cavity and other parts. The shell of heavy hammer crusher is welded with steel plate, which is divided into upper and lower parts, which is connected by bolts. In order to avoid wear and deformation of the inner wall of the box under the impact of the material, the shell is inlaid with protective lining plate. The rotor is composed of the rotor shaft, disk, hammer shaft, ring hammer, board hammer and other parts.
Contact Now
PHZ type ring hammer crusher is suitable for crushing various ores, such as pyrite,phosphate ore, limonite, magnetite, limestone and cobblestone. Its compressive strength does not exceed 60MPa and the surface moisture does not exceed 15%. When the crushed particle size of pyrite ore and phosphate ore is less than 6mm, the surface moisture of the materials is less than 15%.The structural characteristics of the ring hammer crusher can adjust the output particle size. The product has particle size requirements after the material is crushed.
Contact Now
Heavy ring hammer crusher is suitable for coal crushing in the power plant, with large output, uniform discharge particle size, hydraulic shell opening, and convenient maintenance.
Contact Now
Heavy ring hammer crusher is an efficient crushing equipment, especially suitable for crushing a variety of medium hardness and brittle materials, such as limestone, coal, etc.
Contact Now
The coal block is crushed initially after entering the crusher under the impact of the high-speed rotating ring hammer, and then crushed again when rushed to the crushing plate and sieve plate at high speed. Meanwhile, the coal blocks also collide with each other. The impacted coal is sheared and crushed between the ring hammer and the crushing plate and sieve plate, flowing from top to bottom, continuously crushed, and discharged from the sieve hole after reaching the required particle size.
Contact Now
Ring hammer crusher is suitable for crushing all kinds of brittle materials, such as coal, coal rock, coke carbon, slag, shale, loose limestone, etc. The compressive strength of the material shall not exceed 10MPa, and the surface moisture shall not be greater than 8%.NameParameterRotor length X length（mm） Φ600×400Max. feeding size（mm）200Final grain size（mm）30Capacity（m³/h） 22-33MotorType Y180L—8Power（KW）18.5revolution（r/min）970Dimension (L*W*H)（mm）1050×1270×800Machine weight（Kg）1430
Contact Now
Heavy-duty Ring Hammer Crusher is a new product developed, suitable for power plant crushing coal crushing, large output, up to 200-2000T / H.1.Rotor diameter：1200（mm）2.Rotor length ：4465（mm）3.Feed particle size：≤400（mm）4.Finishing particle size：≤25（mm）5.Capacity：1200（t/h）6.Power：630KW7.Overall size (LXWXH):7312×3460×1950mm8.Equipment wt.: excluding motor:42000Kg
Contact Now
Ring hammer crusher is one of crushing equipment, but also a kind of hammer crusher series technology advanced equipment, its role is to smash the stone into finished material. Heavy hammer crusher is an advanced high power, high crushing ratio, high productivity crusher, and broke through the previous crushing principle of crushing equipment, can be reasonably adjusted according to the nature of the material, in the output, power is better.NameParameterRotor length X length（mm）Φ800×800Max.
Contact Now
1. Roller diameter： φ1600mm2. Rotor length: 2524mm3.Rotor quality： 13876kg4.Max.
Contact Now
The main shaft of reversible counterattack hammer crusher is made of high quality alloy forged steel, and the material and heat treatment technology have been very mature in the application of large surface shaft parts for decades. The hammer heads are combined, thus saving a lot of wear-resistant alloy materials and reducing production costs.
Contact Now
Hammer Crusher is Single rotor, irreversible hammer crusher, the impact of the hammer to crush brittle materials or medium hardness minerals (such as coal, salt, limestone, gypsum, etc.), but can not be used with toughness, fibrous and humidity compared with the hammer crusher characteristics: crushing ratio is large, so it is suitable for use under the requirement of small size.NameParameterRotor length X length（mm） Φ800×600Max.
Contact Now
Product description：The hammer crusher is suitable for various materials such as crushing brittle, medium hard, surface moisture not exceeding 2% and compressive strength not exceeding 150MPa. It is used for crushing or fine crushing coal, coal gangue, limestone, shale, feldspar, gypsum, coke, brick and tile, limonite, crushed stone, salt and sulfur, and phosphate ore in many industries such as coal, metallurgy, building materials, chemical industry, power and other departments.
Contact Now
Main application of hammer crusher:Hammer crusher is used to crush all kinds of medium hard and weak abrasive materials. The compressive strength of the material is not more than 100MPa，and the moisture content is less than 15%. The crushed materials are coal, salt, chalk, gypsum, brick, limestone, etc.It can also be used to crush wood, paper or waste of asbestos cement with fiber structure, strong elasticity and toughness to recover asbestos fiber, etc. In addition, hammer crusher can not only be used in crushing production
Contact Now
Product detailThe PCFK reversible impact hammer crusher uses a high-speed rotating hammer head to crush the coal that enters the crusher and rushes towards the impact plate,which can achieve crush in the process of repeated collisions.The impact plate adopts a two-arc suspension body, and the material is discharged from the middle of the end of the two impact plate bodies after crushed.
Contact Now
Hammer crusher is a kind of equipment: single rotor and double rotor. It is a crusher that directly breaks a material of 600-1800 mm to 25 or 25 mm or less. Hammer crusher is suitable for cement, chemical, electric power, metallurgy and other industrial sectors broken medium hardness materials, such as limestone, slag, coke, coal and other materials in the crushing and fine crushing operation.NameParameterRotor length X length（mm） Φ600×400Max.
Contact Now
Reversible impact hammer crusher is one of the main equipment of fine limestone, coal or other brittle materials below medium hardness in metallurgy, building materials, chemical and hydropower industries.
Contact Now
The reversible impact hammer crusher is mainly composed of the crusher host, electric motor, hydraulic coupling, hydraulic station, shock absorption system, etc.
Contact Now
The reversible impact hammer crusher is a mechanical equipment specially designed for crushing medium-hardness brittle materials. This type of crusher is particularly suitable for processing materials such as raw coal and various other brittle materials.
Contact Now
Reversible impact hammer crusher is a new type of crushing equipment, its crushing rotor can be forward or reversed. This kind of crusher is mainly by impact to crush materials, belongs to a new type of crusher equipment.1.Model：PCFK-20252.Rotor length X length：ф2000×2500（mm）3.Max. feeding size：80（mm）4.Finishing particle size：≤3（mm）4.Capacity：500（t/h）5.Power：1250KW6.Overall size (LXWXH):7874×4390×4530mm7.Equipment wt.: excluding motor:62000KgNotes: The capacity listed in the table is obtained under following condition:1.
Contact Now
The advantages of PF1210 impact crusher are high crushing efficiency, low power consumption, uniform product size, can reduce the number of crushing stages, simple structure, large production capacity, impact crusher plate hammer and liner plate, etc. using high wear-resistant materials, simplify the production process, suitable for large and medium scale crushing production. It is applied to the crushing of large materials in metallurgy, building materials, mining, highway, mineral processing and other industries.NameParameterRotor length X length（mm）Φ1250×1000Max.
Contact Now
The comb roller has a hard rubber ring, which has a great effect to prevent the conveyor belt deviation and cleaning. It is specially used for the conveyor of sticky materials. Comcomb roll is applicable, including mining, wharf, coal, power plant, coking, export trade and other fields.
Contact Now
jaw crusher Stone Breaking Crusher Introduction:Stone Breaking Crusher is often used as primary and secondary crusher for mining, metallurgy, construction and some other industries.
Contact Now
Hydraulic jaw crusher is suited for breaking coarse and middle sized material blended with extra hard foreign matters, especially suitable for steel slag breaking. This kind of crusher use hydraulic supporting device, have the overload protection function.
Contact Now
